| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140 |
- #include "planck.h"
- #ifdef BACKLIGHT_ENABLE
- #include "backlight.h"
- #endif
- /* Each layer is given a name to aid in readability, which is then
- used in the keymap matrix below. The underscores do not denote
- anything - you can have a layer called STUFF or any other name.
- Layer names don't all need to be of the same length, obviously, and
- you could also skip them entirely and just use numbers, though that
- means needing to manage the numbers.
- It is preferable to keep the symbols short so that a line worth of
- key mappings fits compactly onto a line of code. */
- /* This was originally based on planck/keymaps/default/default.c, and
- then cbbrowne has revised things */
- /* Things I did not like about the default mapping
- - I find control too hard to get to. I think I'll want it on a
- left finger. Gonna need to lose something to do that...
- - Almost certainly, KC_LCTL should be on [2][1]
- - having dash on [lower-j] is a bit nonintuitive, but may be OK
- - I'll bet I should switch ESC/TAB
- - I'm suspicious that I want to shift M(0) from [4][1] to [4][2],
- and shift ESC off the first column so KC_LCTL and KC_LALT can
- be on the first column.
- - I think I wanna swap ' and ENTER
- - I'm keeping Colemak and Dvorak around for reference, and added
- Workman just for fun. They're useless to me, though.
- */
- /* Other things to do...
- - Need to think about what zsh and readline actions I use lots
- - Wanna figure out macros, so I can put in a "cbbrowne" macro
- - Ought to ensure that Control-Alt-Delete is convenient enough
- - How about Alt-F1 thru Alt-F8?
- - What's the keystroke to get from X to console these days?
- - I do indeed want a sweet number pad!
- - A layer for doing console switching would not be a bad idea
- */
- enum layers {
- _QW = 0, /* Qwerty mapping */
- _CM, /* Colemak */
- _DV, /* Dvorak */
- _WK, /* Workman */
- _LW, /* Lower layer, where top line has symbols !@#$%^&*() */
- _RS, /* Raised layer, where top line has digits 1234567890 */
- _KP, /* Key pad */
- };
- /* Note that Planck has dimensions 4 rows x 12 columns */
- const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [_QW] = { /* Qwerty */
- {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
- {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
- {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
- {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
- },
- [_CM] = { /* Colemak */
- {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
- {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
- {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
- {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
- },
- [_DV] = { /* Dvorak */
- {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
- {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
- {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
- {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
- },
- [_WK] = { /* Workman */
- {KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC},
- {KC_ESC, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT},
- {KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
- {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
- },
- [_RS] = { /* RAISE */
- {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
- {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
- {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_WK), RESET, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
- },
- [_LW] = { /* LOWER */
- {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
- {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
- {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_WK), RESET, KC_TRNS},
- {KC_TRNS, DF(_KP), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
- },
- [_KP] = { /* Key Pad */
- {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_KP_ENTER, KC_KP_PLUS, KC_KP_PLUS, KC_KP_ENTER, KC_KP_ENTER},
- {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_KP_MINUS, KC_7, KC_8, KC_9, KC_KP_DOT},
- {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_KP_PLUS, KC_4, KC_5, KC_6, KC_0},
- {BL_STEP, KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_SPC, DF(_QW), KC_1, KC_2, KC_3, KC_0}
- }
- };
- /* I'm planning to use this to set up some macros, including one to
- expand into "cbbrowne", more to prove it can be done than anything
- else.
- */
- enum macro_id {
- M_P0,
- M_P1,
- M_P2,
- M_P3,
- M_P4,
- M_P5,
- M_USERNAME
- };
- const uint16_t PROGMEM fn_actions[] = {
- };
- const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
- {
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- #ifdef BACKLIGHT_ENABLE
- backlight_step();
- #endif
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
- return MACRO_NONE;
- };
|